Evacuated tube solar water heaters(CS-07GLZ)

Introduction:

1.TANK
Outer tank material:High quality painted steel (White) plate thickness 0.4mm;
Inner tank material:SUS304-2B food grade stainless steel plate thickness 0.31mm;
Heat preservation:72 Hr;
Insulation layer:high density polyurethane foam thickness 55mm ;
Holes:4 holes,water inlet and outlet,electrical heater,vent.
2.Vacuum tube
Model:47mm*1500mm , 58mm*1800mm , 58mm*2100mm;
double layer concentric borosilicate tempered 3.3 glass tube.
3.Bracket(Supporting frame)
Angle:45 degree;
Material :galvanized plate,thickness 1.2mm.

Assitant water tank,electrical heating element,controller,reflector is optional.

Domestic Solar Water Heating (SS-01ALM)

Introduction:

1.TANK
Outer tank material:Stainless steel;
Inner tank material:SUS304-2B food grade stainless steel plate thickness 0.31mm;
Heat preservation:72 Hr;
Insulation layer:high density polyurethane foam thickness 55mm ;
Holes:4 holes,water inlet and outlet,electrical heater,vent.
2.Vacuum tube
Model:47mm*1500mm , 58mm*1800mm , 58mm*2100mm;
double layer concentric borosilicate tempered 3.3 glass tube.
3.Bracket(Supporting frame)
Angle:45 degree;
Material :aluminum alloy.

Assitant water tank,electrical heating element,controller,reflector is optional.

Solar Thermal Collectors (KFT-HP)

Introduction: Specifications:
1) inner manifold : copper header
2) outer manifold: stainless steel SUS304-2B/aluminum alloy
3) Insulation: rock wool
4) Rubber Seals and Rings: Stabilized high temperature silicone rubber
5) Optimal installation angle: 30-70o Vertical, 0 Horizontal
6) Maximum Operating Pressure: 0.6¡ª0.8 MPa
7) Optimal flow rate: 0.1L/min/tube - 0.026G/min/tube
8) Glass tube dimensions: 47mm x 1.5m x 15-30 pcs 58mm x 1.8m x 10-30 pcs
9) Heat preservation: 72hrs
10) Hail resistance: 25mm
11)Heat pipe : anti-freezing > -35 degree
12)Support stand:stainless steel/aluminum alloy Detailed Product Description
  1) solar collector is designed with pressure up to 0.6Mpa.
  2) Easy to use, also convenient to install
  3) Can be put in the courtyard, on the roof or balcony
  4) Inlet water hole connects to the tap water, and the outlet hole connects to the tap water, and the outlet hole produces pressure hot water directly
  5)Efficiency: The advantage of solar tubes is that insulate the inner tube from heat loss. This means that once heat is absorbed, it is transferred to the water in the manifold, and not lost to the outside environment. This is the key difference between solar tubes and flat plate solar collectors: the insulative properties. Combined with heat transfer efficiency of the heat pipe, the collector can deliver excellent heat output all year round.
  6)Aesthetics: solar collector is designed to be low profile, sitting closed to the surface of the roof. Tubes are black and so blend in nicely with most roof colors.
  7) Heat pipe has its special principle and function, and no water in the pipe. If one of the pipe is broken, the heat collector still could be used normally. Therefore, this kind of products has gradually accepted by consumers. However, every coin has two sides. The product also has its disadvantages.

Evacuated tube U pipe Solar Collectors(KFT-SUP)

Features:
1. The Vacuum tubes transform solar light into heat energy and then transfer the heat to the working media depending upon the fin and U-shaped copper pipe in the manner of thermal conduciton.

2.There is no water in the vacuum tube,so the tube will not broken in the winter.

3.It has a lower thermal loss, stronger adaptability and better performance of aging-resistant membranous layer,specially design for cold area.

4.Can operate with water pressure up to 0.8Mpa.

5.Can be combined with existing energy source.

6.Storage do not need be installed above the collector.

7.It can be combined with the architecture perfectly.

Flat plate Solar Collectors(KFT-CFP)

Product Description
Solar Flat Panel Collector Features:

Flat panel collector(KFT-FP) has nice outlook, solar flat plate collector with high efficiency, Different absorb material and size is available, Stable performance and long service life. Ultrasonic welding ensures to conduct the thermal heat to the risers quickly.

Separate Solar Water Heaters(KFT-T)

Introduction:

1) Use patent heat pipes, it is sure that no water goes into the tube and there are no incrustation, no bursting. Moreover, water can go upward at anytime.
2) Use solar collector technology, it is sure to be anti-freezing in winter, and it could also work in the bad weather with high efficiency.
3) Use the electric heating water tank specially for solar water heater.
4) Double energy: You could use hot water at any time in a day because solar water heater also has an electrical heating system for auxiliary heating.
5) Automatically intelligent control and management all day.

9) With double copper coil in water tank.